TEL: +86-577-57183885
Categories
Contact Us
Address:Wanglin Industrial Zone, Beibaixiang, Yueqing, Wenzhou, Zhejiang, China
Contact:Shuo Lin
TEL:86-577-57183885
Fax:86-577-57183877
Email:info@cnseaward.com
Twin Rod Cylinder

Twin Rod Cylinder

CXSW series twin rod cylinder with built-in magnet for automatic switching (magnetic sensor) and self-lubricating bearings. Its piston rod does not require lubrication. It uses a standard rubber mat to ensure a smooth, safe and quiet operation of the cylinder. It has a variety of flexible installations, a sophisticated look and a wide range of applications. If the required aperture is 10 mm, there is no cushion.
Chat Now

Specifications:

Bore (mm)

12

16

20

25

32

40

50

63

80

100

Fluid

air

Action Mode

Double action

Highest working pressure

1.0mpa

Lowest working pressure

0.12mpa

0.1mpa

Environment and fluld of temperature

-10~+60

Piton speed

50-500mm/s

50-400mm/s

Cushion

Rubber butter

Stroke length tolerance

+1.5~0mm

Lubrication 

No need

Bearing

Sliding bearing/ball bearing

Rotational accuracy piston rod

Sliding bearing

±0.08°

±0.07°

±0.06°

±0.05°

±0.04°

Ball bearing

±0.10°

±0.09°

±0.08°

±0.06°

±0.05°

Takes over control caliber

M5*0.8

1/8

1/4

3/8

Product description:

CXSW series twin rod cylinder with built-in magnet for automatic switching (magnetic sensor) and self-lubricating bearings. Its piston rod does not require lubrication. It uses a standard rubber mat to ensure a smooth, safe and quiet operation of the cylinder. It has a variety of flexible installations, a sophisticated look and a wide range of applications. If the required aperture is 10 mm, there is no cushion.

Product features:

1. This twin rod cylinder has metal bearings and ball bearings. It has a high level of non-rotational accuracy and does not require a rotation stop. Its two single rod cylinders are fixed in parallel on the end plates. This product is very easy to install and can be easily reproducible and adjusted when using a parallel pin reaming for maintenance.

2. This cylinder implements the JIS standard. Its piston rod end deflection is small, so it is suitable for precise guidance. It features an extended sliding support rail that eliminates the need for additional lubricant and provides good guiding properties. Its resistance to bending and twisting is good.

3. In addition to the axial direction, each side of the twin rod cylinder has mounting holes to provide customers with a variety of mounting and fixing methods. There are two sets of air inlets and air outlets on both sides of the cylinder for practical selection. The bumper on the front of the barrel can adjust the cylinder stroke and reduce the impact.

How to order:

CXSW.jpg


Hot Tags: twin rod cylinder, China, factory, suppliers
Related Products
  • Contact Us
    Address:Wanglin Industrial Zone, Beibaixiang, Yueqing, Wenzhou, Zhejiang, China
    Contact:Shuo Lin
    TEL:86-577-57183885
    Fax:86-577-57183877
    Email:info@cnseaward.com
  • Categories
  • Copyright © Wenzhou Seaward Import & Export Co.,Ltd All rights reserved.