TEL: +86-577-57183885
Categories
Contact Us
Address:Wanglin Industrial Zone, Beibaixiang, Yueqing, Wenzhou, Zhejiang, China
Contact:Shuo Lin
TEL:86-577-57183885
Fax:86-577-57183877
Email:info@cnseaward.com
Mob Hydraulic Cylinder

Mob Hydraulic Cylinder

Mob hydraulic cylinder is light hydraulic cylinder, which is equipped with double-bar and stroke-adjustable delivery cylinders. Different devices can be selected according to different requirements or customized. Widely used in hydropower engineering, metallurgical industry, construction industry, aerospace industry, cranes, textile chemicals, injection molding machines, elevators, ship lifts, offshore drilling platforms, etc.
Chat Now

Specifications:

 Bore(mm)

30

40

50

63

80

100

125

Max. stroke(mm)

1200

2000

3000

Light Type

Rated pressure

70 kgf/cm²

Pressure-resistant

140 kgf/cm²

Min. starting pressure

3 kgf/cm²

Operating temperature range(℃)

-10~+80(Ambient temperature and oil temperature)

Medium

Hydraulic oil

Product introduction:

Mob hydraulic cylinder is light hydraulic cylinder, which is equipped with double-bar and stroke-adjustable delivery cylinders. Different devices can be selected according to different requirements or customized. Widely used in hydropower engineering, metallurgical industry, construction industry, aerospace industry, cranes, textile chemicals, injection molding machines, elevators, ship lifts, offshore drilling platforms, etc.

Product features:

1. This mob hydraulic cylinder has a simple structure, so it is easy to install and disassemble. It uses imported sealing material. It uses a tie rod type and a double acting piston. The piston rod is previously subjected to rolling and hardening treatment, and then subjected to chrome plating. This product is precisely ground to ensure good rust and abrasion resistance.

2. Mob hydraulic cylinder uses a sealing kit with an advanced structure. It works even without oil supply. It has low starting pressure and long service life. The drawbar cylinders use high-strength threaded steel rods, usually located on the outside of the cylinder housing for additional stability.

Note:

*Self-lubricating bearing, so shaft is no more need lubrication

*Add adjustable stroke on the end of cylinder,so that cylinder can change the position smoothly

(Please inform in advance when order)

* varies of accessories are optional to meet different requirement

*Adopt high-temperature resistant seal, so that hydraulic cylinder can be work at 180°C

 (Please inform in advance when order )

* Put a adjustable screw on the end of shaft, that cylinder can be adjustable during stroke

(Please inform in advance when order )

* On the base of standard cylinder can produce  varies of non-standard products to meet different requirement.

How to order:

MOB_2.jpg

Hot Tags: mob hydraulic cylinder, China, factory, suppliers
Related Products
  • Contact Us
    Address:Wanglin Industrial Zone, Beibaixiang, Yueqing, Wenzhou, Zhejiang, China
    Contact:Shuo Lin
    TEL:86-577-57183885
    Fax:86-577-57183877
    Email:info@cnseaward.com
  • Categories
  • Copyright © Wenzhou Seaward Import & Export Co.,Ltd All rights reserved.